EWM Tetrix 551 AC/DC Comfort 2.0 puls TIG Welder (Water-cooled) - Powersource only

Product Details

EWM Tetrix 551 AC/DC Comfort 2.0 puls TIG Welder (Water-cooled)

Key Product Features

• Water-cooled AC/DC TIG inverter welding machine.
• activArc – Precise, focussed arc with reduced heat input and deep penetration for optimum root fusion.
• Electronic HF start.
• TIG lift arc welding.
• Special AC welding procedure to join markedly different aluminium plates together, e.g. welding 1-mm-sheet to a 10-mm-plate.
• Features characteristics for EWM activArc and EWM spotArc at no extra charge.
• Adjustable AC waveform, sine, trapezoidal, square current.
• Adjustable AC frequency between 30 Hz and 300 Hz.
• Adjustable AC balance.
• TIG automated pulsing with automatic specification of required pulse parameters.
• Pulsed TIG welding in Hz and kHz range up to 15 kHz.
• 100 free memory locations for recurring welding tasks (JOBs).
• Non-latched/latched operation.
• Reduced secondary current accessible using torch trigger.
• Spot welding/tack function (spotArc/spotmatic).
• Adjustable up-slope and down-slope time.
• Adjustable gas pre- and post-flow time.
• MMA welding.
• MMA average value pulsing.
• Adjustable hot start current and hot start time.
• Adjustable Arcforce.
• Antistick function.
• Energy-saving thanks to high efficiency and standby function.
• Connection capability for remote control and function torch.
• Mains connection: 3 x 400 V; other mains voltages and multivolt as an option.
• Crane-liftable casing.
• Optional network connectivity with ewm Xnet software via LAN or WiFi gateway.
• ON 7pol (092-001826-00000) “7-pole connection socket for accessory components and/or as digital interface” required for Xnet.
• PC interface for PC300 XQ software.
• Excellent torch cooling, resulting in cost savings on consumables due to high-performance centrifugal pump and 12-litre water tank.