EWM Tetrix 300 AC/DC Comfort 2.0 puls 5P TM TIG Welder - Powersource only

Product Details

EWM Tetrix 300 AC/DC Comfort 2.0 puls 5P TM TIG Welder

Key Product Features

  • Modular AC/DC TIG inverter welding machine, gas- or water-cooled.
  • Comfort 2.0 control, simple operation with click wheel.
  • TIG welding.
  • activArc – Precise, focussed arc with reduced heat input and deep penetration for optimum root fusion
  • Electronic HF start.
  • TIG lift arc welding.
  • Special AC welding procedure to join markedly different aluminium plates together, e.g. welding 1-mm-sheet to a 10-mm-plate.
  • Features characteristics for EWM activArc and EWM spotArc at no extra charge
  • Adjustable AC waveform, sine, trapezoidal, square current.
  • Adjustable AC frequency between 30 Hz and 300 Hz.
  • Adjustable AC balance, pulse balance.
  • Automatic AC frequency.
  • TIG average value pulsing: the preset welding current is maintained at all times, so particularly suitable for welding as per welding procedure specification.
  • TIG automated pulsing with automatic specification of required pulse parameters.
  • Pulsed TIG welding in Hz and kHz range up to 15 kHz.
  • 100 free memory locations for recurring welding tasks (JOBs).
  • Non-latched/latched operation.
  • Reduced secondary current accessible using torch trigger.
  • Spot welding/tack function (spotArc/spotmatic).
  • Adjustable up-slope and down-slope time.
  • Adjustable gas pre- and post-flow time.
  • MMA welding.
  • MMA average value pulsing.
  • AC electrode welding.
  • Adjustable hot start current and hot start time.
  • Adjustable Arcforce.
  • Antistick function.
  • Gas-cooled or optionally water-cooled with cool 41 U31 cooling unit.
  • Energy-saving thanks to high efficiency and standby function.
  • Connection capability for remote control and function torch.
  • Excellent torch cooling, resulting in cost savings on consumables due to high-performance centrifugal pump and 4-litre water tank (cool 41U31 cooling unit).
  • Trolly 35.2-2, Trolly 55-5 and Trolly 55-6 trolleys available.
  • Optional network connectivity with ewm Xnet software via LAN or WiFi gateway.
  • PC interface for PC300 XQ software.

 

Product Code DescriptionPriceIn Stock Qty
090-000235-00502 EWM Tetrix 300 AC/DC Comfort 2.0 puls 5P TM TIG Welder - Powersource only £POA In stock   

Proud to supply:

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK