Line Boring

Sir Meccanica WS Collection

Sir Meccanica W series includes 9 models
Each single machine operates on different dimensions and performs, with extreme precision, on-site repairs of holes and machinery articulated joints of big and small dimensions whose disassembly would result in a machine stop and transportation to a workshop. Statistically, the use of this innovative equipment reduces of 85% the machining time.

• Broad range of applications
• No transport costs
• Shorter machining time
• Less labour costs
• Safe, reliable performance

The electronic circuit is used to ensure greater operational safety, to safeguard from excessive strain, the rotation motor, in the event of incorrect setting of the parameters and to compensate any critical points during machining. It allows to automatically and proportionally decrease the feed speed to reach the maximum strain point of the rotation motor, in order to dynamically decrease the workload, without exceeding the stop threshold for protection. Thanks to the STP bar , it is possible to know the instantaneous work load of the rotation motor, to choose in an optimal way , the operation parameters (rotation speed and feed speed) based on the hardness of the material, the type of installed tool, the working diameter and the diameter of removal of the tool. Furthermore, the bar signals in advance the alarm condition and the subsequent shutoff of the control panel, flashing until the recovery of the operating conditions. Power supply 110 ~ 220V 50/60 Hz with self-selection of the mains voltage, without the use of transformers or inverters, eliminating any ESPS ® electromagnetic interference, electronic management of the torque of the two motors with electromechanical synchronization, rotation revs display, acoustic warning with error code rotation motor display, feed revs display, acoustic warning with error code feed motor display.

• Main switch
• Emergency switch
• right/left inverter
• right/left rotation inverter
• Potentiometer for rotation settings
• Potentiometer for feeding settings
• Switch for rapid translation shaft

 

Sir Meccanica WS Collection

The Sir MeccanicaW series is characterized by: A rotation drive system

“Worm gear-helical wheel”, with permanent lubrication, patented and state-of-the-art. To obtain an elevated productivity, high performance and low noise, the mechanisms are made with 16CrNi4 steel, cemented, tempered and refaced. Particular attention has been given to the realization of the profile, to obtain a better contact among the surfaces. The wheels have a cast iron G20 hub on which an antifriction bronze fusion G-CuSn12 is applied, to optimise performances and efficiency. Housing and flanges are made of engineering cast iron G20 UNI 5007. The commercial components used, such as tapered-roller bearings or radial ball bearings, oil seals, gaskets, lubricants are accurately selected to guarantee high quality.

The power has reached elevated standards, the ideal thing for any applicative situation which requests motion linearity, overload capacity and load control with high inertia. Magnetized and tested one by one, they guarantee reliability and efficiency. They are characterized by:

• Permanent magnets made of calibrated ferrite, with a high coercive force.
• Multi-bladed collector to obtain a perfect commutation.
• 4-poles tacho generator with rare earths magnets built into the motor
• IP54 protection level
• Skewed armature for smooth running at low speeds

 

Sir Meccanica W Smaller

SIR MECCANICA W SMALLER

Boring diameter 22-70 mm (0.87 - 2.76") Welding Diameter 25-400 mm (0.98 - 15.75") Tool Holder Shaft Length 1950 mm (76.77") 2 connectable bars 1000 + 1000 mm Tool Holder Shaft Diameter 20 mm (0.79")

The machines perform, with one single and simple set-up, on site work for:

• in-line boring
• internal and external overlay welding

restoring any tapered or worn out hole to its original dimension, standing out for their stability, accuracy, compact size, sturdiness and safety in a smart and smooth operational way.

Sir Meccanica WS1 Plus

---

SIR MECCANICA WS1 PLUS

Boring diameter 22-180 mm (0.87 - 7.09") Welding Diameter 25-250 mm (0.98 - 9.84") Tool Holder Shaft Length 2380 mm (93.70") 3 connectable bars 1000 + 1000 + 500 mm Tool Holder Shaft Diameter 35 mm (1.38")

The machines perform, with one single and simple set-up, on site work for:

• boring
• internal and external overlay welding

restoring any tapered or worn out hole to its original dimension, standing out for their stability, accuracy, compact size, sturdiness and safety in a smart and smooth operational way.

---

 

Sir Meccanica WS2 Plus

SIR MECCANICA WS2 PLUS

Boring diameter 32-450 mm (1.26 - 17.72") Welding Diameter 25-450 mm (0.98 - 17.72") Tool Holder Shaft Length 2660 mm (104.72") 2660 mm (104.72") 3 connectable bars 1000 + 1000 + 860 mm Tool Holder Shaft Diameter 50 mm (1.97")

The machines perform, with one single and simple set-up, on site work for:

• boring
• internal and external overlay welding
• drilling
• tapping

restoring any tapered or worn out hole to its original dimension, standing out for their stability, accuracy, compact size, sturdiness and safety in a smart and smooth operational way.

---

 

Sir Meccanica WS2 Standard

SIR MECCANICA WS2 STANDARD

Boring diameter 22-400 mm (0.87 - 15.75") Welding Diameter 25-400 mm (0.98 - 15.75") Tool Holder Shaft Length 2600 mm (102.36") 2600 mm (102.36") 3 connectable bars 1000 x 1000 x 730 Tool Holder Shaft Diameter 40 mm (1.57")

The machines perform, with one single and simple set-up, on site work for:

• boring
• internal and external overlay welding
• drilling
• tapping

restoring any tapered or worn out hole to its original dimension, standing out for their stability, accuracy, compact size, sturdiness and safety in a smart and smooth operational way.

---

 

Sir Meccanica WS2 Compact

SIR MECCANICA WS2 COMPACT

Boring diameter 22-400 mm (0.87 - 15.75") Welding Diameter 25-400 mm (0.98 - 15.75") Tool Holder Shaft Length 2600 mm (102.36") 2600 mm (102.36") 3 connectable bars 1000 + 1000 + 730 Tool Holder Shaft Diameter 40 mm (1.57")

The machines perform, with one single and simple set-up, on site work for:

• boring
• internal and external overlay welding
• drilling
• tapping

restoring any tapered or worn out hole to its original dimension, standing out for their stability, accuracy, compact size, sturdiness and safety in a smart and smooth operational way.

---

 

Sir Meccanica WS3

SIR MECCANICA WS3

Boring diameter 42-800 mm (1.65 - 31.50") Welding Diameter 42-800 mm (1.65 - 31.50") Tool Holder Shaft Length 4400 mm (173.23") 4400 mm (173.23") 3 connectable bars 1500 + 1600 + 1600 Tool Holder Shaft Diameter 60 mm (2.36")

The machines perform, with one single and simple set-up, on site work for:

• boring
• internal and external overlay welding
• drilling
• tapping

restoring any tapered or worn out hole to its original dimension, standing out for their stability, accuracy, compact size, sturdiness and safety in a smart and smooth operational way.

---

 

Sir Meccanica WS5

SIR MECCANICA WS5

Boring diameter 180-1000 mm (7.09 - 39.37") Welding Diameter 100-1000 mm (3.94 - 39.37") Tool Holder Shaft Length 3000 mm (118.11") 3000 mm (118.11") 2 connectable bars 2000 + 1135 mm Tool Holder Shaft Diameter 80 mm (3.15")

The machines perform, with one single and simple set-up, on site work for:

• boring
• internal and external overlay welding

restoring any tapered or worn out hole to its original dimension, standing out for their stability, accuracy, compact size, sturdiness and safety in a smart and smooth operational way.

---

 

Sir Meccanica WS7 Plus

SIR MECCANICA WS7 PLUS

Boring diameter 400-1700 mm (15.75 - 66.93") Welding Diameter 400-1700 mm (15.75 - 66.93") Tool Holder Shaft Length 3000 mm (118.11") 3000 mm (118.11") 2 connectable bars 2000 + 1135 mm Tool Holder Shaft Diameter 100 mm (3.94")

The machines perform, with one single and simple set-up, on site work for:

• boring
• internal and external overlay welding

restoring any tapered or worn out hole to its original dimension, standing out for their stability, accuracy, compact size, sturdiness and safety in a smart and smooth operational way.

---

 

Sir Meccanica WS7 3PH

SIR MECCANICA WS7 3PH
 

Boring diameter 400-1700 mm (15.75 - 66.93") Tool Holder Shaft Length 3000 mm (118.11") 3000 mm (118.11") 2 connectable bars 2000 + 1135 mm Tool Holder Shaft Diameter 100 mm (3.94")

The machines perform, with one single and simple set-up, on site work for:

• boring

restoring any tapered or worn out hole to its original dimension, standing out for their stability, accuracy, compact size, sturdiness and safety in a smart and smooth operational way.