ArgweldŽ Purge Eye 100 Monitor
Argweld® Purge Eye 100 Weld Monitor - A continuous sampling Instrument
The Weld Purge Monitor has a number of important features:
Keeps waiting time to a minimum
The monitor can tell the operator exactly when the oxygen level is low enough to commence welding. No estimating or guesswork is involved, so no time is wasted waiting for the correct level to be reached.
Measures the content of oxygen in the purge gas to indicate when it is safe to carry out a weld.
Saves on excessive use of inert gas
The exact oxygen content is given, so no more inert gas than necessary has to be used to ensure that the weld will be free of oxidation.
Prevents weld failures
Premature starts on welds are avoided, high quality is ensured.
Its small size makes is easy and very convenient to use in all purging situations.
The monitor is available at low relative cost and is a perfect accessory for use with any pipe purging system or argon welding enclosure.
Continuous monitoring of oxygen levels
A continuous read out of the oxygen level is given, even when welding is taking place. This can avoid unforeseen purge problems that could cause quality failures after the weld has been started.
The API Purge Monitor can be self calibrated, saving on expensive certifications.
- 20.9% down to 0.01% (100 ppm)
- To measure to 10 ppm, see Argweld® Titanium Purge Monitor
- At 20% = ± 0.2%; At 2% = ± 0.02%
- 155 mm x 81 mm x 38 mm
- Battery type PP3 9v
- LCD (Liquid Crystal Display)
- 0.210 kg
- 310 mm x 260 mm x 80 mm
- 0.870 kg (nett), 1.1 kg (gross), 1.0 kg (volumetric)
Contact us for more details or to discuss any of your welding needs