Tercoo Abrasive Disc
What is Tercoo?
Tercoo® is a rotating disk for the removal of rust, paint, tar, epoxy, paint, adhesives etc from various materials such as steel, iron, concrete or stone. The result is a sandblasted surface with the appropriate texture suitable for the application of a new protective coating.
Tercoo® provides the correct surface preparation for proper adhesion of new protective coatings.
How does Tercoo work
Tercoo® is a natural rubber disk with 12 hard metal (tungsten carbide) tips (pins). The tips are at a certain angle to the centre of the disk. During operation, the centrifugal force created by the rotational speed of the drill causes the flexible rubber disk to react in such a way, that a “hammer effect” is created with the tungsten carbide tips. This movement ensures that the tips clean the surface perfectly, removing all contaminants and other old coatings. The hammer effect creates no heat, so tough materials such as tar, adhesives and sealants will be easily removed. This is an entirely opposite concept compared to other tools. Other tools use friction to remove contaminants (steel brush etc) which produce a lot of heat and work ineffectively with bitumen based products, tar, adhesives, tectyl etc.
In other words, it does not matter what the coating, Tercoo® is always clean.
Use and safety
ALWAYS wear goggles, working gloves, dust mask and protective clothing;
Maximum speed 4000 rpm;
Optimal speed between 2500 and 3000 rpm; DIRECTION = clockwise;
Disk should never be used on: EDGES, RAISED SURFACES etc.
Who Uses Tercoo?
- Shipping
Tercoo® is an excellent tool for the maintenance of your boat or ship: removing old paint, rust, tar and build up of contaminants.
- Offshore
Tercoo® is an excellent tool for repairing and/or maintenance of offshore installations working with water and/or vapour-proof coatings.
- Industry
Tercoo® is an excellent tool for cleaning weldingseams, even in small spaces because little or no sparks are produced.
- Construction
Tercoo® is an excellent tool for cleaning concrete and rubber where chlorine compounds are used.
- Bodywork
Tercoo® is an excellent tool to deal with rust in bumpers, doors, beams and welds. Tercoo® also removes tectyl.
Specifications
Size
Disc Diameter 126 mm + / - 0.8 mm
Disc thickness 6.7 mm + / - 0.3 mm
Stud Record 8 mm
Material
Rubber Natural rubber with binder and 50 Shore A hardness
Tungsten Carbide - Hard Metal Hardness 1500HV
