SIR Meccanica WS2 PLUS
Tecnical Characteristics
| The machine is equipped with an electronic control panel with diagnostic display | ||
| TOOL HOLDER SHAFT DIAMETER | mm | 50 ( 1,97 in ) |
| TOOL HOLDER SHAFT LENGTH | mm |
2660 usable mm (N° 3 connectable bars (1000mm+1000mm+720mm) |
| BORING DIAMETER | mm | 32 - 450 ( 1,25 in - 17,725 in ) |
| WELDING DIAMETER | mm | 25 - 450 ( 0,98 in - 17,725 in ) |
| WELDING TECHNOLOGY | SPIRAL (CONTINUOUS WITH VARIABLE STEP) | |
| LONGITUDINAL STROKE | mm | UNLIMITED WITH STEP OF 220 mm (8,66 in) |
| ROTATION MOTOR | mm | C/C (CE COMPLIANT) |
| FEED MOTOR | mm | C/C (CE COMPLIANT) |
| FEED SYSTEM | mm | ELECTRIC-MECHANICAL |
| OUTPUT TORQUE AT THE BAR | mm |
290 Nm (266 Rpm) |
| MAX ROTATION SPEED | rpm | 266 |
| FEED RATE | mm/rpm | 0 - 0,5 ( 0 – 0,02 in / rev ) |
| MAX FEED SPEED(w/rapid button) | mm/min | 285 |
| REMOVAL MATERIAL | cm³/min | 23 |
| DRIVE UNIT WEIGHT | kg | 35 |
Working Diameters
With Standard Equipment
IN-LINE BORING
Starting from ø 52 mm to over ø 450 mm
OVERLAY WELDING
Internal– from ø 25 mm to over ø 450 mm
External- from ø 20 mm to over ø 450 mm
Drilling – from ø 5mm to max ø 45 mm
Tapping – from ø 8mm to max ø 45 mm
with presetting for Tapping
Standard Equipment
| N°1 DRIVE UNIT |
| N° 1 CONTROL PANEL |
|
N° 1 CABLE FOR CONTROL PANEL |
| N° 1 CONTROL PANEL HOLDER |
|
N° 3 CONNECTABLE MAIN TOOL HOLDERS ø 50 mm Lgth. 1000mm + 1000mm + 860 mm: Tot. Usable lgth. 2660 mm |
| N° 4 BEARING CARRIERS |
|
N°24 BRACKETS FOR ADJUSTING DIAMETERS (N° 12 X 50 MM, N° 6 X 100 MM, N° 6 X 230 MM) |
|
N° 1 CENTERING KIT (2 RINGS - 6 BOSSES - 6 SCREWS M10x60 mm) |
| N° 6 THREADED BARS M10 X 250 mm FOR CENTERING KIT |
|
N° 5 CARBIDE INSERTS |
|
N° 1 TOOL HOLDER S10C x 50 mm (COMPLETE WITH WRENCH AND TORX SCREW) |
|
N° 1 TOOL HOLDER S12C x 80 mm (COMPLETE WITH WRENCH AND TORX SCREW) |
|
N° 5 TOOL-HOLDER EXTENSIONS (Ø 90 MM + Ø 150 MM + Ø 230 MM + 2 KNUX TYPE EXTENSIONS LGTH 100 MM + 150 MM), |
|
N° 1 SMALL HOOK ø 35mm (device for regulating cutting depth of tool holder) |
|
N° 1 MICROSPAND (MODULAR DEVICE USED FOR INTERNAL MEASUREMENTS) |
|
N°3 MICROSPAND EXTENSIONS (n° 1) 100 MM + (N° 2 ) 50 MM |
|
N°1 COMPARATOR 1/100 |
|
N°1 COMPARATOR EXTENSION |
|
N°2 COMPARATOR HOLDER 8/8 – 10/8 |
|
N° 1 WELDING TORCH CABLE WITH EUR-FITTING, |
|
N° 1 TELESCOPIC WELDING TORCH SHAFT Ø 40 MM TOTAL LGTH. 1500 MM, |
|
N° 2 ADAPTING BUSHINGS FOR TORCH SHAFT LGTH 90 – LGTH. 150 |
|
N° 4 TORCH-HEADS FOR INTERNAL OVERLAY WELDING C/W WELDING WIRE NOZZLES AND GAS DIFFUSER (B 125 MM + C 90 MM + G 180 MM + M 70 MM), |
|
N° 1 TORCH-HEAD FOR EXTERNAL OVERLAY WELDING C/W WELDING WIRE NOZZLES AND GAS DIFFUSER (A 320 MM), |
|
N° 3 TORCH-HEADS EXTENSIONS (D 55 mm + E 45 mm + H 135 mm) |
|
N° 1 LATHED WELDING WIRE NOZZLE Ø 0.8 |
|
N° 2 SHORT WELDING WIRE NOZZLES ø 0,8 mm – ø 1 mm, |
|
N° 2 LONG WELDING WIRE NOZZLES ø 0,8 mm – ø 1 mm, |
|
WRENCHES |
|
OPERATION MANUAL |
|
N° 1 TROLLEY (containing machine and components) |
Equipment upon Request
| KIT | |
| KIT ø 30 mm |
For boring starting from Ø 32 mm
|
| KIT 2000 ø 50 mm |
For facing bosses, creating circlip grooves, external machining
|
CERTIFIED TEST – STEEL C45
| DIAMETER | mm | Ø150 | Ø400 |
| CUTTING DEPTH | mm | 5 in the radius
10 in the diameter |
3 in the radius
6 in the diameter |
| FEED SPEED | mm/min | 15 | 10 |
Control Panel
| An electronic circuit has been inserted to guarantee a major safety in operation and to safeguard the rotation motor from excessive strain in case of an incorrect setup of the parameters, as well as to compensate possible critical points in machining. It automatically and proportionally reduces the feeding speed to reach the maximum strain point of the rotation motor, in order to dynamically reduce the load of the work, without passing the stop point for protection.
Thanks to the led bar called STP, it is possible to constantly monitor the motor’s work load, so to be able to optimize the choice of the parameters (rotation speed and feed speed), based on the hardness of the material, the type of tool being used, to the machining diameter and to routing diameter of the tool. Furthermore, the bar signals in advance the alarm condition and the subsequent shut down of the control panel, flashing until the working conditions are restored. |
|
Product Data Sheets |
| The technical characteristics include:
AC 110 ~ 220 50 / 60 HZ WITH AUTOSELECTION OF MAINS VOLTAGE, WITHOUT THE USE OF TRANSFORMERS OR INVERTERS; ELIMINATING ELECTROMAGNETIC INTERFERENCES ESPS ® TORQUE ELECTRONIC RUNNING OF THE TWO MOTORS WITH ELECTROMECHANIC SYNCHRONIZATION DISPLAY FOR SPEED OF ROTATION REVOLUTIONS ACOUSTIC WARNING WITH DISPLAY WITH FIGURED SIGNALS OF POSSIBLE FAULTS DURING THE RUNNING OF THE ROTATION MOTOR DISPLAY FOR SPEED OF FEEDING REVOLUTIONS ACOUSTIC WARNING WITH DISPLAY WITH FIGURED SIGNALS OF POSSIBLE FAULTS DURING THE RUNNING OF THE FEEDING MOTOR MAIN SWITCH EMERGENCY SWITCH INVERTER DX/SX FOR FEEDING INVERTER DX/SX FOR ROTATION POTENTIOMETER FOR ROTATION REGULATION POTENTIOMETER FOR FEEDING REGULATION SWITCH FOR RAPID TRANSLATION OF THE SHAFT |
