Hypertherm Powermax85
Handheld or mechanized plasma system
for cutting and gouging metal
Overview
| Operating data | ||
| Cut capacity | Thickness | Minimum Cut Speed |
| Recommended | 1" (25 mm) | 20 ipm (500mm/min) |
| Severance | 1-1/2" (38mm) | 5 ipm (125mm/min) |
| Gouge Capacity | ||
| Metal removed per hour: 19.5 lbs (8.8 kg) | ||
| Depth x width: .23" (5.8 mm) x .28" (7.1 mm) | ||
|
|
||
Applications
- Smart Sense technology automatically adjusts the gas pressure according to cutting mode and torch lead length for optimal performance.
- Boost Conditioner circuit (on CSA models) improves performance on low-line voltage, motor generators, and fluctuating input power.
- Fast Connect torches, CNC interface, and four work lead styles increase versatility for handheld and meachanized use.
- Simplified control panel with LCD screen for easy operation
Key Torch Advantages
- 15 degree and 75 degree Duramax hand torchesenable operators to easily select the right tool for the job. The handle is more heat resistant and performs at least five times longer in high impact tests than previous torches.
- Standard and short-barreled Duramex series machine torches allow a wide variety of mechanized applications with X-Y tables, track systems, pipe and robotic cutting systems.
- Conical Flow noxxle increases arc energy density for superior cut quality with little dross.
- Patent pending shield reduces dross and enables smoother drag cutting for a better cut.
Specifications
| Input Voltages
(±10%) |
200 - 480 V, 1-PH, 50/60Hz CSA
200 -600 V, 3-PH, 50/60Hz CSA 400 V, 3-PH, 50/60Hz CE |
| Input Current @ 12.2kW |
200/208/240/480 V, 1-PH CSA
|
| Rated Output Voltage | 143 VDC |
| Output current | 25 - 85A |
| Duty cycle @ 40°C (104°F) | 60% @ 85 A, 230-600 V 3-PH
60% @ 85 A, 480 V, 1-PH 50% @ 85 A, 240V |
| Output for 100% duty cycle
@ 104°F (40°C) |
66 A @ 230-600 V |
| Maximum OCV | 305 VDC (CSA), 270 VDC (CE) |
| Dimensions with handle | 19.7" (500 mm) D; 9.2" (234 mm) W;
17.9" (455 mm) H |
| Weight with 25' Torch | 71 lbs (32 kg) CSA
62 lbs (28 kg) CE |
| Gas Supply | Clean, dry, oil-free air or nitrogen |
| Flow rate | 400 scfh; 6.7 cfm (189 l/min) @ 85psi |
| Input power cable length | 10' (3 m) |
Engine-driven generator operation
| Engine Drive
Rating (kW) |
System Output
(amps) |
Performance
(arc stretch) |
|---|---|---|
| 20 | 85 | Full |
| 15 | 60 | Full |
| 12 | 40 | Full |
Cut Chart
| Material | Thickness | Current | Maximum cut speed* | ||
| inches | mm | amps | ipm | mm/min | |
| Mild Steel | 10 GA
1/4 1/2 3/4 1 1 1/4 |
3
6 12 19 25 32 |
45
85 85 85 85 85 |
205
200 70 36 21 14 |
5000
5330 2000 920 560 350 |
| Stainless Steel | 1/4
1/2 3/4 1 |
6
12 19 25 |
85
85 85 85 |
205
60 30 18 |
5850
1750 770 475 |
| Aluminum | 1/4
1/2 3/4 1 |
6
12 19 25 |
85
85 85 85 |
215
85 46 25 |
6200
2400 1170 670 |
* Maximum cut speeds are the results of Hypertherm’s laboratory testing. For optimum cut performance, actual cutting speeds may vary based on different cutting applications. Refer to the operator manual for more details.
